Description XCMG Rough Terrain Crane XCR90 90t

NEW XCMG Rough Terrain Crane XCR90 , Maximum rated lifting capacity 90t

XCR90 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc. XCMG G1 generation rough terrain crane XCR90 is designed with four innovative technologies integrated to create an ultrahigh performance ,green and energy saving efficient and intelligent lifting equipment.
XCR90 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc. XCMG G1 generation rough terrain crane XCR90 is designed with four innovative technologies integrated to create an ultrahigh performance, green and energy saving efficient and intelligent lifting equipment.
Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.
Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.
The boom should be extended according to the telescoping code shown by digits, which means the percentage of boom sections extended.








FEATURE of the XCMG Rough Terrain Crane XCR90
（1）Large displacement dual-variable plunger pump with confluent main valve adopting XCMG patented technology integrated,
leads to improvement by 13% in operation efficiency, which takes the lead in the industry.
（2）Boom length and lifting capacity take the lead in the industry.
（3）Large power engine + low speed large torque transmission system with hydraulic torque converter; acceleration performance is improved by 10%, the max. travel speed is 34.8 km/h and the max. grade ability is 65%; the min. turning radius is only 6.5 m, the smallest in the industry, contributing to excellent maneuver ability and quick job site transfer.
（4）Torque converter with lockup function, low speed large torque, high speed and high efficiency, and driving fuel consumption is reduced by 20%.
（5）Fault self-diagnosis system is adopted; there are 285 control nodes; automatic inspection and automatic diagnosis can be shown in real-time on the display. The fault diagnosis rate can reach 76%.
（6）All-wheel drive system, unimpeded travel on different road conditions.
（7）5-section boom of 48 m is the longest in the industry, the length of boom and jib can reach 65.5 m after jib is installed.
（8）Two jib sections of 10.5m-17.5m, with 0, 15 and 30 deg. jib offset angles.
（9）Max. single line pull is 78 KN.
（10）Max. hoisting speed (single line, no load, 4th layer) is 145 m/min.
（11）Slewing speed 0-2 r/min.
（12）194kW large power engine+hydraulic transmission system with low speed and large torque.
The max. output torque is 1100N.m, the acceleration performance is improved by 10%, with high speed and high efficiency;
6 forward gears and 3 reverse gears are available with quick transfer.

The specification of the XCMG Rough Terrain Crane XCR90 90t