Description XCMG Rough Terrain Crane XCR120 120t

NEW XCMG Rough Terrain Crane XCR120 , Maximum rated lifting capacity 120ton, Fully-extended boom(m) 50

XCMG XCR120 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc. XCMG G1 generation rough terrain crane XCR120 is designed with four innovative technologies integrated to create an ultrahigh performance ,green and energy saving efficient and intelligent lifting equipment.
XCMG XCR120 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc. XCMG G1 generation rough terrain crane XCR120 is designed with four innovative technologies integrated to create an ultrahigh performance, green and energy saving efficient and intelligent lifting equipment.
Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.
Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.
The boom should be extended according to the telescoping code shown by digits, which means the percentage of boom sections extended.





XCMG Showroom Location: Egypt, Canada, Turkey, United Kingdom, Italy, France, Germany, Viet Nam, Philippines, Peru, Saudi Arabia, Indonesia, Pakistan, Mexico, Spain, Thailand, Morocco, Kenya, Argentina, South Korea, Chile, UAE, Colombia, Algeria, Sri Lanka, Romania, Bangladesh, South Africa, Kazakhstan, Kyrgyzstan, Nigeria, Uzbekistan, Tajikistan, Japan, Malaysia, Australia





FEATURE of the XCMG Rough Terrain Crane XCR120
XCR120 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc.
Superb lifting performance
5-section boom of 48m.
Two jib sections of 9.2m-16m , with 0, 15 and 30 deg. jib offset angles.
Three boom telescoping modes, wider working radius and better application adaptability.
High performance
5-section boom of 48 m is the longest in the industry, the length of boom and jib can reach 61 m after jib is installed.
Large displacement dual-variable plunger pump with confluent main valve adopting XCMG patented technology integrated, leads to improvement by 13% in operation efficiency.
Large power engine + low speed large torque transmission system with hydraulic torque converter; acceleration performance is improved by 10%, the max. travel speed is 40 km/h and the max. grade ability is 70%.
> Green and energy-saving
New energy-saving hydraulic system with double-variable pump combined with a valve-controlled load-sensing system.
The fuel consumption under different working conditions can be reduced by 10%~15%.
ECO energy-saving control, fuel consumption under different working conditions can be reduced by 5%-9%.
Torque converter with lockup function, low speed large torque, high speed and high efficiency, and driving fuel consumption is reduced by 20%.
> Science and technology intelligence
Dedicated driving safety active protection technology is adopted to realize classified management, such as automatic warning,gear and speed limit, automatic brake according to different fault categories, in order to improve the active safety of the driving vehicle.
Intelligent boom system can standardize the operation of the users and improve the operation safety; it provides users with the most effective lifting plan, and improves the working efficiency.
Fault self-diagnosis system is adopted; there are 285 control nodes;
automatic inspection and automatic diagnosis can be shown in real-time on the display.

The specification of the XCMG Rough Terrain Crane XCR120 120t