NEW XCMG Rough Terrain Crane XCR55 L4 , Maximum rated lifting capacity(t) 55

XCR55L4 short wheelbase crane is widely used for lifting operations in oilfields, mines, road and bridge construction, etc. XCMG G1 generation rough terrain crane XCR55L4 is designed with four innovative technologies integrated to create an ultrahigh performance, green and energy saving efficient and intelligent lifting equipment.
XCR55L4 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc. XCMG G1 generation rough terrain craneXCR55L4 is designed with four innovative technologies integrated to create an ultrahigh performance, green and energy saving efficient and intelligent lifting equipment.

Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.
Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.
The boom should be extended according to the telescoping code shown by digits, which means the percentage of boom sections extended.







FEATURE of the XCMG Rough Terrain Crane XCR55 L4
XCR55L4 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc.
Large displacement dual-variable plunger pump with confluent main valve adopting XCMG patented technology integrated, leads to improvement by 13% in operation efficiency, which takes the lead in the industry.
Large power engine + low speed large torque transmission system with hydraulic torque converter; acceleration performance is improved by 10%, the max. travel speed is 35 km/h and the max. grade ability is 70%; the min. turning radius is only 6 m, the smallest in the industry, contributing to excellent maneuver ability and quick job site transfer.
New energy-saving hydraulic system with double-variable pump combined with a valve-controlled load-sensing system. The fuel consumption under different working conditions can be reduced by 10%~15%.
Torque converter with lockup function, low speed large torque, high speed and high efficiency, and driving fuel consumption is reduced by 20%.
4-section boom of 36.5 m is the longest in the industry, the length of boom and jib can reach 52.5 m after jib is installed.
Two jib sections of 9.2m-16m , with 0 deg., 15 deg. and 30 deg. jib offset angles.
Max. single line pull is 51 KN.
Max. hoisting speed (single line, no load, 4th layer) is 150 m/min.
Slewing speed 0-2 r/min.
163kW large power engine +hydraulic transmission system with low speed and large torque. The acceleration performance is improved by 10%, with high speed and high efficiency; 6 forward gears and 3 reverse gears are available with quick transfer.

---

Materials and specifications are subject to change without notice.
Featured machines in photos may include additional equipment. The specification do not necessarily show the standard version of the machine.
Ask our manager for available options.

---

09.00 - 17.00 hrs Monday - Friday
Not available on Saturday's or Sunday's