Please don't copy or download any of these photos for posting on the Internet or for promotional use.
Please send us a personal message if you would like to use them.
The Description Caterpillar 12 H motor grader
Caterpillar 12 H grader, 2005 year, 7,500 hours, ex government department, 12 ft blade, air conditioing, EROPS cabin, piped for ripper. This Cat 12H grader is without a Ripper, but we can fit a ripper to a machine, the additional cost is £7,800
Technical specs Caterpillar 12 H grader
Engine Caterpillar C-9 ETA VHP Net Power Gear 1-2 145 hp 108 kw Net Power Gear 3-4 165 hp 123 kw Power Measured @ 2000 rpm Net Power Gear 5-6 165 hp 123 kw Number of Cylinders 6 Net Power Gears 7-8 165 hp 123 kw Max Power 165 hp 123 kw Displacement 537 cu in 8.8 L
Std Operation Weight - Front Axle 8346 lb 3784 kg Std Operation Weight - Rear Axle 22974 lb 10416 kg Std Operation Weight - Total 31320 lb 14200 kg Max Operation Weight - Front Axle 13744 lb 6234 kg Max Operation Weight - Rear Axle 32074 lb 14549 kg Oil System Fluid Capacity 7.1 gal 27 L Max Operation Weight - Total 45818 lb 20783 kg Fuel Capacity 100 gal 378 L Cooling System Fluid Capacity 11.6 gal 44 L Hydrauilc System Fluid Capacity 19.5 gal 74 L Rear Diff/Final Drive Fluid Capacity 12.2 gal 47 L Circle Gearbox Fluid Capacity 1.8 gal 7 L Tandem Case Fluid Capacity (each) 16.9 gal 64 L Tire Size 14.00-24 12PR Operating Voltage 24 V Alternator Supplied Amperage 75 amps
Transmission Caterpillar 12 H grader
Type direct drive power shift Number of Gears - Forward 8 Number of Gears - Reverse 6 Max Speed - Forward 27.4 mph 44 km/h Max Speed - Reverse 21.6 mph 34.7 km/h
Steering Caterpillar 12 H grader
Articulation L/R 50 degrees Turning Radius 24.3 ft in 7.4 m
Wheel Lean 18 degrees Oscillation - Total 32 degrees Ground Clearance 2 ft in 594 mm
Moldboard Width 12 ft in 3658 mm Moldboard Height 24 in 610 mm Moldboard Thickness 0.87 in 22 mm Max Depth of Cut 28.9 in 735 mm Side Shift Left 20.6 in 524 mm Side Shift Right 26 in 660 mm Blade Pull at Max Weight 28867 lb 13094 kg Blade Down Pressure 23807.7 lb 10799 kg
Circle Caterpillar 12 H grader
Diameter 60.2 in 1530 mm Rotation 360 degrees Shift Left 27.4 in 695 mm Shift Right 28.7 in 728 mm Max Reach Outside Tires - Left 73.6 in 1859 mm Max Reach Outside Tires - Right 71.2 in 1809 mm Max Lift Above Ground 18.9 in 480 mm Blade Tip Angle - Front 40 degrees Blade Tip Angle - Rear 5 degrees
Dimensions Caterpillar 12 H grader
Height to Top of Cab 10.2 ft in 3107 mm Overall Length 28.1 ft in 8571 mm Width Over Tires 8 ft in 2440 mm Wheelbase 20 ft in 6086 mm Blade Base 8.4 ft in 2575 mm Tandem Axle Wheelbase 5 ft in 1523 mm Rear Ground Clearance 1.1 ft in 341.5 mm Front Ground Clearance 2 ft in 594 mm
Selected Dimensions 12 H grader
A. Overall Length 28.1 ft in 8571 mm B. Width Over Tires 8 ft in 2440 mm C. Height to Top of Cab 10.2 ft in 3107 mm D. Wheelbase 20 ft in 6086 mm E. Rear Ground Clearance 1.1 ft in 341.5 mm F. Front Ground Clearance 2 ft in 594 mm G. Tandem Axle Wheelbase 5 ft in 1523 mm H. Blade Base 8.4 ft in 2575 mm
Please note these are not M.O.D owned assets Mileage Hrs/Kms: 7,500 Year of Manufacture: 2005 The price: P.O.A. Export Requirements:NLR Stock (No Licence Required)
We stock parts and accessories for every application: transmissions, repair kits, tyres, engines, undercarriage, belts, oils, filters and so much more!
We have a full stock of spare parts, new and second hand. These parts are always on stock which avoids and delays in ordering.
We can arrange shipping from our yard to your door worldwide.
- We can offer land, sea, or air freight.
- We deliver to over 150 countries
Based On What You Have Viewed, You Might Also Like